New ingenious system. Revolutionary!!!!
Your benefits
The paintable wall surface heating can be used as full heating, additional heating and comfort zone, as a perfect solution to problems with mold and moisture and for special solutions (stairs, tepidarium, infrared cabin, keeping ice free) and in all areas such as new buildings, old buildings and renovations and for the protection of listed buildings.
Carbon4 – stands for innovative technologies with intelligence and passion
Our company has been developing heating systems for over 10 years and has constantly devoted itself to the latest technically feasible systems. With the highly flexible heating coatings, we have created the optimum heating solution for many areas of application. The radiant heat of the Carbon-4 infrared heating system creates a completely new room climate without the typical air circulation, which is responsible for the heat rising upwards and the cool air remaining on the floor. The increased sense of well-being through infrared radiation has been medically proven. When heat is generated, the air humidity remains largely constant – which is very pleasant for people with rheumatic diseases, among others. Asthmatics and allergy sufferers can breathe a sigh of relief. A heating system that not only helps you save money, but also has a positive effect on your well-being.
Areas of application
Direct surface heating systems are an innovative and versatile solution for efficient space heating that can be used in a wide range of applications. With their ability to distribute heat evenly and their space-saving design, direct surface heating systems have changed the way we heat rooms, improving both comfort and energy efficiency.
Functionality
The revolutionary direct surface heating on 24 volt low voltage can be used in walls, ceilings and floors. It consists of electrically conductive heating elements that are embedded in the wall or ceiling of a room and can be painted. The radiant heat emitted does not pollute the environment and saves energy when combined with interior insulation.
Ready for the next level?
We make it possible for you!
Whether new build, renovation or conversion, detached house or apartment, listed buildings and special solutions – we have the perfectly planned individual solution.
Tangible – but invisible in 5 steps
You will get an insight into the possibilities of Carbon4 in the initial meeting, and this meeting is always “a matter for the boss”. We ask you lots of questions that are important for your personal project and about the services you require. The more information we receive from you, the more accurately we can calculate a customized quote. This information is relevant, for example:
- Type of heating application: full heating, additional heating, problem solution (moisture or mold remediation), special application
- Floor plan and age of the property
- Energy certificate if available
- Height of the rooms and structure of the walls and ceiling
- Renovation work already carried out or planned, and if so, what exactly?
- Pictures if available
- Current heating system
- Power connection (power) of the property
Of course, we don’t hold back with tips and experience from previous projects. He will be happy to take 30-45 minutes on the phone or via video call (Zoom or Microsoft Teams) for the initial consultation to find out where your personal requirements lie.
The next step is an individually tailored offer, clearly listed. A high level of transparency is particularly important here. Panel heating is “new territory” for many customers, which is why you will of course receive a concrete overview of all the products and components used in detail. The structure of the walls and ceilings is very important with this type of heating, as care must be taken not to lose too much heat into the masonry or to the outside. In old buildings and renovations, it is essential to insulate the outside wall on the inside. We would be happy to make you an offer for this with our specially developed thermo-reflective panels. Now you can make the right decision. We will of course be happy to answer any open questions about the specific offer very flexibly on the phone, in a video call and, of course, at your premises, because you are now making a very long-term decision.
Together with a specialist electrical company and you, we create an electrical plan and draw it in special 3D programs for illustration purposes. This includes:
- Positioning of the transformers: distribution cabinet in a technical room outside the premises (in new buildings), or flush-mounted in the respective room, or surface-mounted in the respective room (depending on the circumstances)
- Preparation of the 24 V side: drawing of the empty electrical pipework and electrical junction boxes or special intelligent Carbon4 junction boxes (complete monitoring and reading of the individual heating tracks on the secondary side)
- Definition of the cable cross-sections to the electrical junction boxes. The cables are also pulled into the corresponding empty conduit in advance
- Definition of the VDE-compliant distribution cabinet (size depending on the number of transformers)
- Preparation of the 230 volt side: 16 C automatic machine per transformer
This jointly defined work is prepared by the respective electrical contractor as part of the preliminary electrical work prior to the installation of the heating coating. We pass on the necessary information on the exact processing of the interior insulation and recommendations on materials (Carbon4 thermal insulation board) to the painting company and drywall builder you have commissioned.
Once the preparatory work has been completed (preliminary trades), the Carbon4 panel heating system is installed by certified specialist companies. This is not a do-it-yourself product, but may only be carried out by certified partner companies of Carbon 4 Heizsysteme GmbH. The system must be connected and commissioned by a specialist electrical company on the 230 volt side. At this stage, our specialists work hand in hand with the specialist electrical company and the installation of the heating system is carried out without noise, dirt and very quickly. Once all the preparatory work has been completed, a detached house, for example, can be equipped with Carbon4 wall/floor/ceiling panel heating or a combination of the two in just a few days. The heating is put into operation immediately by the specialist electrical contractor on the 230 volt side and you will feel the cozy warmth in the rooms in no time at all.
Support for painters/tilers/floor layers
- Transmission of the materials approved by us for the subsequent work (special adhesives, fillers, etc.) in cooperation with and with the approval of the PCI Group (PCI, Thomsit) and many other manufacturers of adhesives and fillers. ATTENTION: Only adhesives or primers approved by us may be used.
- Instructions for reworking the heating coat: Support for the relevant specialist companies (painters, tilers, floor layers, finish coaters) for reworking the heating coat (fillers, reinforcements, etc.).
Feedback from our customers
via Google
People with heart and brain work in this company!
via Google
Insider address has the best things including advice 🙂
via Google
I can recommend the company Carbon4 100%. From planning, delivery date, installation to commissioning, everything worked perfectly.
Many thanks to the whole team.
via Google
I bought 2 panels for my house in Corfu 8 years ago and am still satisfied today. Very pleasant warmth!
via Google
Investment calculator
You can request an initial cost estimate with a non-binding quote here. Enter the relevant data and we will send you an initial basic calculation by e-mail and contact you by phone to discuss it.
* The calculation is without guarantee and requires a personal discussion for a concrete calculation for your needs, where all details will be discussed.
Frequently asked questions
Direct surface heating is an advanced heating system that integrates electrically conductive heating elements into the wall or ceiling of a room. These heating elements are often made of carbon fibers or other conductive materials. The way it works is simple: when you switch on the direct surface heating, an electric current flows through these heating elements. This causes them to heat up and radiate the heat generated evenly into the room. Unlike conventional heating systems, where the air is heated, the heat is emitted directly from the surface of the wall or ceiling. This creates a pleasant and even room temperature.
Direct surface heating offers several advantages:
- Even heat distribution: The heating elements in the wall or ceiling ensure an even temperature in the room without cold spots or temperature fluctuations.
- Space saving: As no radiators or heating pipes are visible, you gain valuable space and have more design freedom.
- Energy efficiency: Direct surface heating systems are energy-efficient as the heat is radiated directly and there is little energy loss.
- Durability and sustainability: They are long-lasting and help to reduce energy consumption and CO2 emissions, especially when powered by renewable energy.
- Healthy indoor climate: Direct surface heating reduces air circulation, minimizes dust and allergens and reduces the risk of mould growth.
Direct surface heating systems are extremely versatile and are suitable for a wide range of premises, including homes, offices, commercial buildings and more. They are particularly effective in rooms with high ceilings or irregular floor plans. They can be used as main or auxiliary heating, depending on the specific requirements of your project. Let’s talk about your project
Yes, direct surface heating systems are safe. They meet strict safety standards and have built-in protection mechanisms to prevent overheating or other potential risks. They are also emission-free and do not contribute to air pollution. However, they are not a do-it-yourself product and may only be installed by certified partner companies of Carbon 4 Heizsysteme GmbH.
The installation costs vary depending on the project and the individual requirements. They include the cost of the heating elements, the installation and any conversions. It is advisable to obtain a precise cost estimate for your specific situation. Arrange a personal consultation to calculate the specific investment for your project.
Yes, in most cases, direct surface heating can be installed as a replacement for conventional heating systems. The exact feasibility depends on the structural conditions and should be assessed by an expert. However, direct surface heating can help to reduce energy consumption and increase comfort.
The maintenance of direct surface heating generally requires little effort. It is important to keep the surface clean and check regularly for any damage. For maintenance, we recommend contacting us or a specialist to ensure that your direct surface heating works optimally and lasts for a long time.
Would you like more information?
We will be happy to answer all your questions about your project in a personal meeting.
In our download area you will find brochures and information on reference projects with facts and figures.