Skip to content
Consultation Partner

New build. Designed all-electric.

Well-insulated houses need little heat – but the right heat, quickly and exactly where it’s needed. The heating paint responds quickly and can be controlled room by room.

House of the future

Little heat demand – but at exactly the right time

Modern low-energy and passive houses need very little heating. But on dull winter days, solar gains and internal heat sources aren’t always enough. What’s needed is a heating system that responds quickly, can be controlled precisely and takes up no space.

The heating paint converts electricity almost entirely into usable heat, directly beneath the surface. Modern glazing keeps most of the long-wave thermal radiation inside the building.

  • No plant room, no hydraulics, no outdoor unit
  • Fast response, control to within 0.2 °C
  • Can be connected to any PV system – with battery storage and energy manager
Modern new build with photovoltaics at dusk (visualisation)
Energy concept

PV, storage, energy manager. One system.

The heating paint can be connected to any PV system. With sufficient storage capacity for one day's demand and an energy manager, electricity is bought cheaply on the electricity exchange or surplus power is sold. This can cut electricity costs significantly.

  1. Photovoltaics

    Your own power from the roof – any PV system can be connected.

  2. Storage

    Battery storage with capacity for one day's heating energy demand.

  3. Energy manager

    Buys electricity cheaply on the exchange and sells surplus power.

  4. 24 V transformer

    Safe low voltage in the room.

  5. Heating paint

    Radiant heat, controlled room by room.

Legal framework

GEG and OIB Guideline 6

Germany: The Building Energy Act (GEG) requires new heating systems to use at least 65 % renewable energy. Electric surface heating systems must additionally meet the requirements of § 71d GEG.

Austria: OIB Guideline 6 (2023 edition) governs thermal insulation, total energy demand, the energy certificate and requirements for heating systems. Individual requirements vary by region.

We check this for you

What counts are the regulations at your location. We clarify them in the project together with your planner or energy consultant.

Does the heating paint comply with the Building Energy Act (GEG)?
According to CARBON4®, the surface heating systems can be used in compliance with the GEG in well-insulated buildings in combination with photovoltaics and ventilation with heat recovery. Electric surface heating is additionally subject to § 71d GEG. We check the requirements for your project.
Is it worth combining it with photovoltaics?
Yes – especially with battery storage and an energy manager. Self-generated electricity is turned directly into heat. A battery that covers one day's heating demand and an energy manager that buys electricity when there is a surplus and supplies it when needed cut energy costs significantly. The energy concept shows what this looks like for your home.
How much heating output does a passive house need?
For passive houses, CARBON4® recommends at least 40 W/m² of installed output to ensure short response times – even if the calculated demand is lower. The exact design is carried out individually.

Your project. Individually planned.

Initial consultation of 30–45 minutes, by phone or video call.

Request a consultation →Call