Wall heating. Warm walls instead of radiators.
Cold exterior walls are the main reason for discomfort in a room. Heating paint makes exactly these walls warm – invisibly, under filler and paint.
Cold walls are the problem – warm walls are the solution
If you sit next to a cold exterior wall, you feel cold – even when the air is warm. Heating paint turns exactly these surfaces into a source of heat. The wall radiates heat instead of drawing it from the body.
Thermal decoupling is always installed between the masonry and the heating surface. It ensures that the heat goes into the room and not into the wall.
- Heating tracks always 60 cm wide, 0.5–10 m long
- First track 10 cm above the finished floor
- Second track 120 cm above the finished floor
- Vertical heating strips are also possible in suitable places, such as next to doors

Build-up in existing buildings
- Masonry
- Plaster
- Primer
- Thermal separation
- Primer
- Heating paint
- Mineral filler
- Final coating
Build-up on plasterboard
- Plasterboard, joints reinforced and filled
- Primer
- Heating paint
- Levelling filler, fully reinforced
- Paint or final coating
Metal studs conduct electricity and are carefully insulated from the heating.
Why does wall heating need thermal decoupling?
Can I hang pictures on a heated wall?
You might also be interested in
Your project. Individually planned.
Initial consultation of 30–45 minutes, by phone or video call.