Skip to content
Consultation Partner

Electricity heats. But how much?

To be honest: it depends on your building. We explain what matters – and, if you wish, calculate your project individually instead of promising blanket figures.

Room thermostat being set to 20 degrees (visualisation)
Two terms

Output is not consumption.

A car with 150 hp doesn't constantly use 150 hp. In the same way, a heating system only draws its output when a room needs heat.

kWOutput

How much heat the system can deliver. It is sized according to room size and building.

kWhConsumption

What is actually consumed: output × time spent heating. That's what you pay for.

Heating only when needed

The room controller switches the surface on when the temperature drops and off again once it has been reached.

Influencing factors

What determines consumption.

01 · Building

Insulation & windows

The heating demand of a passive house and an uninsulated older building differs many times over.

02 · Design

Area & decoupling

Correctly sized surfaces and thermal decoupling prevent heat from flowing into the masonry.

03 · Controls

Room by room

Each room is controlled individually, accurate to 0.2 °C – heat is only provided where it's needed.

04 · Temperature

Comfortable at fewer degrees

Radiant heat already feels comfortable at around 20 °C. Every degree less can save around 6% energy.

05 · Electricity

Tariff & photovoltaics

Your own PV electricity reduces grid consumption – how much depends on the system, storage and season.

06 · Operation

No maintenance costs

No moving parts, no burner, no water in the system.

Individual, not generic

Get your project calculated.

Instead of estimates from the internet, the CARBON4® team calculates your building: heating output, components and a realistic estimate of consumption.

  • Free of charge and without obligation
  • Response within two working days
  • Floor plans and an energy performance certificate help – we'll request them if needed
What happens next
  1. Review of your detailsby the CARBON4® technical team
  2. Questions & documentsbriefly by phone or email
  3. Calculation & quoteheating output, components, consumption estimate
Use

* Required field – plus email or phone so that we can reach you.

Documents (optional)

By sending, you consent to the processing of your details for the purpose of handling your enquiry (privacy policy).

Is heating with electricity expensive?
There is no blanket answer. The installed output says nothing about annual consumption. What matters is the building's heating demand, a suitable design, the controls and the actual heating times. That is why we calculate every project individually.
How much does it cost to install heating paint?
That depends on the area, the substrate, the number of rooms and the electrical planning. After the initial consultation, you receive a quote with a transparent breakdown of all components.
What running costs are there apart from electricity?
The system has no moving parts, no burner and no water in the circuit, and is considered virtually maintenance-free. If servicing is needed, a licensed electrical contractor can replace electrical components with identical parts.
Why doesn't CARBON4® give flat-rate consumption figures?
Because flat-rate figures are misleading when it comes to buildings. As soon as reliable measured data from CARBON4® reference projects is available, we will publish it together with all the underlying conditions.
Request a consultation →Call